Universal Testing Machine,Hardness Tester,Weather Station,Metal Detector,Check Weigher,Impact Testing,Uji Kekerasan,Alat uji,Jual Alat Uji,Alat Uji Indonesia
Description :
The Precision Test Strip Punch & Die Cutters are intended for accurate and rapid preparation of test pieces for use intensile strength tests, ring crush tests, folding endurance test, water absorbency test and other similar tests without any deformation and damage. It is suitable for cutting a very wide range of sheet material such as plastics, textiles, paper and paperboard. Multi test samples cutting is simultaneously feasible.
Cut size: 15x300, 25x300, 50x300, 100x300 mm and also available at customer requirement.
- 15x100 mm for sample preparation of Folding test (Schopper type)
- 15x300 mm for sample preparation of Tensile, Short Span, Folding (Kholer Molin) & Water absorption Test
- 25x300 mm for sample preparation of Tensile Test as per TAPPI T494
- 25.4 x 150 mm for sample preparation of Plybond Test
- 50x300 mm for sample preparation of Tensile Test for Tissue paper
Cut size: 15x300, 25x300, 50x300, 100x300 mm and also available at customer requirement.
- 15x100 mm for sample preparation of Folding test (Schopper type)
- 15x300 mm for sample preparation of Tensile, Short Span, Folding (Kholer Molin) & Water absorption Test
- 25x300 mm for sample preparation of Tensile Test as per TAPPI T494
- 25.4 x 150 mm for sample preparation of Plybond Test
Features :
Specification :
Strip Punch– For preparation of test pieces towards use in tensile strength tests size 15x300mm.
The Precision Test Strip Punch & Die Cutters are intended for accurate and rapid preparation of test pieces for use in tensile strength tests, ring crush tests, folding endurance test, water absorbency test and other similar tests.
It eliminates testing errors due to sample preparation.
Cutting of multi samples simultaneously possible.
The cutter is provided with an automatic clamping
device
, which by means of clamping beam, holds the sheet material firmly prior to the cutting action.
Punch & Die manufactured from tempered tool alloy steel to ensure long life.
Sturdy Model, easy to operate.
Available for the following test piece sizes:
i. 15 X 300 mm
ii. 25 X 300 mm
iii. 50 X 300 mm
iv. 1/2 X 6 inches
ii. 25 X 300 mm
iii. 50 X 300 mm
iv. 1/2 X 6 inches
Accuracy :
Test piece width 15 mm, 25 mm and 1/2 inches
|
± 0.05 mm
|
Test piece width 50 mm
|
± 0.1 mm
|
Test piece length
|
± 0.1 mm
|
