Universal Testing Machine,Hardness Tester,Weather Station,Metal Detector,Check Weigher,Impact Testing,Uji Kekerasan,Alat uji,Jual Alat Uji,Alat Uji Indonesia
AU - 1005 B TENSILE STRENTH TESTER (Digital Model)
Description :Electronic Tensile Tester (Vertical Model) withDigital Display of Tensile Strength & Stretch of paper, paperboard and similar materials.
Complete with memory for retaining peak value, automatic or normal zero setting, overload and over travel protection facilities. A dual screw unit testing frame to accommodate large size test piece with wide load ranges.
Standard model range :
0-50 Kgf. or 500 N.
Available in other load range from 0-100 Kgf. Or 1000 N, 0-1000 Kgf. Or 10000N.
Also available in higher Load Capacity.
Features :
Specification :
1. Measuring
Range |
: 0-500 N with 0.1 N
|
2. Elongation
|
: 0-300 mm with 0.1 mm
|
3. Display
|
: Digital with peak hold.
|
4. Clamping Width
|
: 15 mm stainless steel clamp with non slip grip.
|
5. Clamping Length
|
: 10 - 200 mm Manual / adjustable.
|
6. Jaw seperation
|
: 0 - 300 mm. Through precision lead screw.
|
7. Cross head speed
|
: 5 - 200 mm /min. variable straining speed through calibrated potentio meter.
Fast return of cross head at maximum speed. |
8. Accuracy
|
: ± 1% of reading down to 10% of the load cell capacity
|
9. Computer output
|
: Not available.
|
Cast aluminium body with M.S. fabricated support.
Loadcell overload protection preset to stop motor at 120% overload.
Strain, Stop and return panel controls.
Loadcell overload protection preset to stop motor at 120% overload.
Strain, Stop and return panel controls.
OPTIONS
a. Non-standard clamps / Pneumatic grips with foot switchb.
Zero span jaw for fibre orientation/Bonding test.c.
Finch device for wet tensile test.d.
Precision test strip cutter for cutting width 15 mm.e.
Calibrated check weights
Zero span jaw for fibre orientation/Bonding test.c.
Finch device for wet tensile test.d.
Precision test strip cutter for cutting width 15 mm.e.
Calibrated check weights
Other ranges: 0 - 1000 N or 100 Kgf., 0-10000 N or 1000 Kgf.
Applicable Standards
ISO 1924/2, SCAN P38, TAPPI T 494,
CPPAD 34
CPPAD 34
Changes:
UEC products undergo contimous development. The technical data in this catalogue are therefore subject to change
UEC products undergo contimous development. The technical data in this catalogue are therefore subject to change
