Showing posts with label QTM. Show all posts
Showing posts with label QTM. Show all posts

02186906777 (parmin) WAW-600DL Servo Hydraulic



WAW-600DL Servo Hydraulic


description :WAW- DL Servo Hydraulic Tensile Testing Machine is mainly used for tensile test with high efficiency requirement. Equipped with relevant fixtures, this machine can also be used for compression, bending and shearing etc. tests. Constant strain, Constant stress and constant displacement test are available. Strain velocity, stress velocity and displacement velocity conform to the requirement of GB, ASTM, DIN, ISO, JIS, BS etc. metal tensile testing standards.


It is an ideal equipment for tensile test of metal rod, board, screw, steel strand (with special fixture) etc. material with high stiffness.


features :
Features:
-       Long travel double-action oil cylinder with high accuracy & close sealing to meet the requirement of different specimen lengths or specimen with high elongation.
-       High stiffness load frame with low gravity center. Impact with specimen broken was released by hydraulic unit to max. decrease the noise and vibration.
-       Upper oil cylinder design grant a lower tensile space makes the operation very easy.
-       GTM (Germany) Double-Flange double direction load cell with high linearity to ensure the high accuracy of test result.
-       Non-step in full testing range.
-       High quality hydraulic components to avoid the leakage and protect the testing environment.
-       MOOG (USA) DDV D633 Servo Valve ensures high response speed and high control accuracy.
-       Over-load, over-flow, over-temperature self-detection.
-       Close-loop control system with test load, displacement, deformation control modes, and a smooth switch among each mode.

specification :

02186906777 (parmin) Servo-Pneumatic Universal Testing Machine


Servo-Pneumatic Universal Testing Machine


description : This machine is a development of the NAT which was developed by Keith Cooper and Professor Steven Brown at the University of Nottingham. The use of a high precision servo-pneumatic valve in conjunction with a low-friction actuator and sophisticated data acquisition and control, results in a performance that is equal to many servo-hydraulic systems.


Accurate, digitally generated waveforms are applied by the actuator producing repeatable stress variations in test specimens that are simulative of those in a road pavement due to moving traffic. The actuator is double-acting allowing both compressive and tensile forces to be applied. A triaxial cell system is available for the measurement of the resilient modulus of unbound materials.


features :

Key Features


  • Low cost dynamic loading universal test system ideally suited to testing asphalt and unbound granular materials
  • Double acting low friction actuator with integral stroke transducer
  • Utilises high performance ceramic spool servo-valve
  • High quality stainless steel frame
  • Issued with UKAS accredited certificate of calibration for EN 12697-24; EN12697-25, EN 12697-26
  • Accessories available to perform a range of standard and non standard test methods
  • Can be supplied with standard software to perform EN, ASTM andAASHTO test methods and universal software with which to design non standard test routines


Key Uses


  • Assessment of resistance to permanent deformation (rutting)
  • Measurement of stiffness modulus
  • Assessment of resistance to fatigue cracking
  • Resilient modulus of unbound materials
  • Mix design
specification :
Maximum LoadElectronically limited to 15.5kN
Load Transducer±20kN
Actuator Stroke mm30
Frequency Hz0 to 30
Electrical Supply¹220-240 Volts 50 Hz @ 13A
Compressed Air7-10 bar at 600 L/min
Dimension mm (WxDxH)Frame 360 x 400 x 740
Control Box 360 x 280 x 140
Working space required mm(WxDxH)825 x 1650 x 2100 when fitted in cabinet CRT-TCC
Estimated Weight KgFrame 30
Control box 6
PCIncluded

02186906777 (parmin) Servo-Hydraulic Universal Testing Machine


Servo-Hydraulic Universal Testing Machine


description : The Servo-Hydraulic Universal Testing Machine (CRT-UTM-HYD) is a well designed, inexpensive machine specifically developed for the testing of materials used in pavement construction. A motorized, adjustable crosshead reduces the time between test setups. The programmable temperature cabinet provides the possibility to perform frequency/temperature sweeps. Accurate waveforms are digitally generated and applied by the actuator producing repeatable conditions that are simulative of those created by moving or static vehicles. The actuator is double-acting allowing both compressive and tensile forces to be applied. Various systems are available for the measurement of the modulus of unbound materials.

features :
  • Designed to perform a range of tests on asphaltic paving materials, sub-grade soils and granular sub-base materials
  • Double acting fatigue rated hydraulic actuator with integral stroke transducer
  • Utilises Star servo valve with ‘Sapphire Technology’
  • Motorised adjustable lower crosshead with automatic hydraulic frame clamping
  • Integral programmable temperature controlled cabinet
  • Issued with UKAS accredited certificate of calibration for EN 12697-24; EN12697-25, EN 12697-26
  • Accessories available to perform a range of standard and non standard test methods
  • Can be supplied with standard software to perform EN, ASTM andAASHTO test methods and universal software with which to design non standard test routines


Key Uses


  • Assessment of resistance to permanent deformation (rutting)
  • Measurement of stiffness modulus
  • Assessment of resistance to fatigue cracking
  • Resilient modulus of unbound materials
  • Mix design

specification :
ModelCRT-UTM-NUCRT-UTM-HYD25CRT-UTM-HYD100/130
Maximum LoadElectronically limited to 15.5kN25kN100 – 130 kN
Load Transducer±20kNVariable dependant on capacity100 – 130
Actuator Strokemm3050100
Frequency0 to 30 Hz0 to 70 Hz0 to 100 Hz
Electrical Supply¹220-240 Volts 50 Hz @ 13A3 Phase 415 Volts 50 Hz @ 16AHydraulic power unit: 415 Volts, 50 Hz, three phase as standard TCC: 240 Volts, 50 Hz, single phase as standard. Control Unit: Universal input 110/240 Volts, 50/60 Hz
Compressed Air7-10 bar at 600 L/min7 bar @ 100 L/min For accessories only7 bar @ 100 L/min For accessories only
Dimension mm(W x D x H)UTM 360 x 400 x 740
Control Box 360 x 280 x 140
UTM & Cabinet:
1000 x 1300 x 2400
Power Pack: 630 x 580 x 890
UTM & Cabinet:
1150 x 1200 x 2750
Power Pack: 700 x 940 x 1110
Working space required mm (W x D x H)825 x 1650 x 2100 when fitted in cabinet CRT-TCC1100 x 2300 x 26001m clearance at front and sides
Estimated Weight KgUTM 30
Control box 6
UTM & Cabinet 680
Power Pack 60
UTM & Cabinet: 600
TCC: 200
Power Pack: 180
PCIncludedIncludedIncluded

02186906777 (parmin) WAW-300C Series Servo Hydraulic


WAW-300C Series Servo Hydraulic


description :
WAW-C series computer controlled servo hydraulic universal testing machine is mainly used to execute the tension, compression, bending, flexural etc. Test for metal materials. Attached with simple accessories and devices, it can be used to test wood, concrete, cement, rubber, and so on. It is very suitable for making test to different metal or nonmetal materials under high toughness and hardness against extreme big loading force.

Standards:  ISO6892 :Metallic materials -- Tensile testing -- Part 1: Method of test at room temperature

Applications: It is widely used in different steel works, engineering areas, quality control department, Universities and institutes as well as other areas and works.


features :
Full computer controlled testing process.

?Adopt oil-hydraulic automatic clamps which can be operated from separate control box.

?Wedge tension jaw processed by advanced technology; Increase the stiffness of crosshead under high load and High intensity tests.

?Powerful multifunctional control software will provide more testing methods to meet ASTM, ISO and other testing Standards.

?Report Guide will create your testing report in only three steps.

?Programable testing software makes LCF testing or cyclic testing become available. 

?Overload protection will secure operators.


specification :

02186906777 (parmin) WAW-1000D Servo Hydraulic


WAW-1000D Servo Hydraulic


description : WAW-1000D computer controlled servo hydraulic universal testing machine is mainly used to execute the tension, compression, bending, flexural etc. Test for metal materials. Attached with simple accessories and devices, it can be used to test wood, concrete, cement, rubber, and so on. It is very suitable for making test to different metal or nonmetal materials under high toughness and hardness against extreme big loading force.s

features :?Full computer controlled testing process.
?Adopt oil-hydraulic automatic clamps which can be operated from separate control box.
?Wedge tension jaw processed by advanced technology; Increase the stiffness of crosshead under high load and High intensity tests.
?Powerful multifunctional control software will provide more testing methods to meet ASTM, ISO and other testing Standards.
?Report Guide will create your testing report in only three steps.
?Programable testing software makes LCF testing or cyclic testing become available. 
?Overload protection will secure operators.


specification :